Stamping parts processing appear the reason of iron filings


Release time:

2021-11-12

Stamping parts in the process of processing and trimming sometimes appear iron filings, which will seriously affect the quality of stamping parts, reduce productivity, but also delay delivery to customers. So why is this happening? Let's use the following points to explain.

Stamping parts processing appear the reason of iron filings

Stamping parts in the process of processing and trimming sometimes appear iron filings, which will seriously affect the quality of stamping parts, reduce productivity, but also delay delivery to customers. So why is this happening? Let's use the following points to explain.

Stamping parts production plant stamping parts processing

1. Cutting edge is not straight when stamping parts are processed.

2, stamping die design is not reasonable.

3, stamping parts and die surface is not consistent.

4, stamping parts processing edge hardness is not enough.

5, stamping parts processing edge gap is not reasonable.

6. Poor finish of stamping edge.

7, scrap knife two intercept.

8, the edge into the depth of too deep.

The above is stamping parts in the processing of iron chip problems, from these aspects to a large extent can avoid the iron chip and lead to poor products.

processing,stamping